Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position ВМТ of a step of compression
5.6. Removal, installation and дефектовка a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.13. System of release of the fulfilled gases
5.14. The engine power supply system
5.14.1. Features of a design
5.14.2. Pressure check in the engine power supply system
5.14.3. Pressure decrease in the power supply system
5.14.4. Removal and installation of the air filter, the muffler of noise of an admission and an air line
5.14.5. Replacement of the fuel pump
5.14.6. Replacement of a fuel tank and its bulk pipe
5.14.7. Check and replacement of a regulator of pressure of fuel
5.14.8. Removal and installation of a fuel stage
5.14.9. Removal, installation and check of atomizers
5.14.10. Removal and installation of throttle knot
5.14.11. Check and replacement of a regulator of idling
5.14.12. Adjustment and replacement of a cable of a drive throttle заслонки
5.14.13. Removal and installation of a pedal of an accelerator
5.15. System of catching of steams of fuel
5.16. System рециркуляции the fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





5-14-4-snyatie-i-ustanovka-vozdushnogo-filtra-glushitelya-shuma-vpuska-i-vozdukhovoda.html

5.14.4. Removal and installation of the air filter, the muffler of noise of an admission and an air line

The air filter remove at its damage and for access reception to other units in a motor compartment.
It be required to you: a key on 10 (it is more convenient face), a screw-driver with a crosswise edge.
For removal of the air filter execute the following.
1. Loosen the a fastening collar to the air filter воздухоподводящего sleeves …
2. … also disconnect a sleeve from a filter branch pipe.

THE NOTE
Pay attention to that on a branch pipe of the air filter and on the brink воздухоподводящего sleeves are triangular labels for correct installation of a sleeve. Attaching a sleeve to the air filter, combine these labels.

3. Turn out three bolts of fastening of the air filter to a mudguard …
4. … also remove the air filter, having taken out a branch pipe located in the bottom of the case of the filter, from a mouth of an air line of the muffler of noise of an admission.
5. Establish the air filter in an order, the return to removal.

For removal of the muffler of noise of an admission and an air line execute the following.
1. Remove the right forward wheel and establish a forward part of the car on a reliable support.
2. Remove подкрылок the right forward wing (Removal and installation of mudguards of wheels and Lockers see).
3. Turn out a bolt of fastening of an arm of the muffler of noise of an admission to a body.
4. Take the holder of the muffler from an arm aperture on a body …
5. … also remove the muffler, shifting it from an air line branch pipe.
6. Take the holder of a bringing sleeve of an air line from an aperture in a body …
7. … also remove an air line, taking a sealant of its taking away sleeve from an aperture in a body.
8. Establish details in an order, the return to removal.

The previous page
5.14.3. Pressure decrease in the power supply system
The following page
5.14.5. Replacement of the fuel pump