Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position ВМТ of a step of compression
5.6. Removal, installation and дефектовка a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.13. System of release of the fulfilled gases
5.14. The engine power supply system
5.14.1. Features of a design
5.14.2. Pressure check in the engine power supply system
5.14.3. Pressure decrease in the power supply system
5.14.4. Removal and installation of the air filter, the muffler of noise of an admission and an air line
5.14.5. Replacement of the fuel pump
5.14.6. Replacement of a fuel tank and its bulk pipe
5.14.7. Check and replacement of a regulator of pressure of fuel
5.14.8. Removal and installation of a fuel stage
5.14.9. Removal, installation and check of atomizers
5.14.10. Removal and installation of throttle knot
5.14.11. Check and replacement of a regulator of idling
5.14.12. Adjustment and replacement of a cable of a drive throttle заслонки
5.14.13. Removal and installation of a pedal of an accelerator
5.15. System of catching of steams of fuel
5.16. System рециркуляции the fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes



5.14.2. Pressure check in the engine power supply system

Check of pressure of fuel in a fuel stage of the engine is possible only in the presence of a manometre with a set of adapters for connection to the fuel pipeline.
1. Include ignition and listen: within several seconds you should hear a sound of work of an electrogasoline pump. If it it is not audible, check up an electric feed circuit of an electrogasoline pump.

Keep in mind that the electrogasoline pump does not join, if in system топливоподачи there is a pressure. Differently, if you preliminary already included ignition and tried to start up the engine the serviceable electrogasoline pump already should create pressure in system and it невключение in this case is not malfunction.

2. Disconnect from the fuel filter the pipeline of giving of fuel in a fuel stage, having compressed a clamp запорного an element of its fastening (Replacement of the fuel filter see).
3. For check of pressure of fuel connect between the fuel filter and a fuel stage a manometre (with a limit of measurement not less than 5 kgs/sm2). At the idling engine pressure in топливопроводе should be nearby 300 кПа (3 kgs/sm2).
Following reasons of pressure decrease are possible:
– A faulty regulator of pressure of fuel;
– The littered fuel filter;
– The faulty fuel pump.
Ways of elimination of these malfunctions see in subsection the engine Power supply system.

The previous page
5.14.1. Features of a design
The following page
5.14.3. Pressure decrease in the power supply system