4-3-20-proverka-stepeni-iznosa-tormoznykh-kolodok-diskov-i-barabanov.html
4.3.20. Check of degree of deterioration brake колодок, disks and drumsIt be required to you: a calliper or a ruler.
|
THE NOTE
If at braking the car withdraws aside or extraneous noise is audible, check up a condition brake колодок.
|
1. Establish the car on the lift or a jack (supports).
2. Remove a forward wheel.
|
|
|
|
|
4. Measure a thickness of a brake disk. If its thickness of less admissible (tab. 4.3 see), replace a brake disk (Replacement of a brake disk see ).
|
Table 4.3 the Sizes brake колодок, disks and drums
|
THE NOTE
Replace колодки in following cases:
– A thickness of frictional overlays less than 0,5 mm;
– The surface of overlays is made oily;
– Overlays are unsteadily connected to the basis
|
|
THE NOTE
As much as possible admissible working diameter of a brake drum выштампован on its inside.
|
|
|
