Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
4.1. General provisions
4.2. Daily service (ЕО)
4.3. The first maintenance service (ТО-1)
4.3.1. Check and adjustment of a tension of a belt of a drive of the generator and the pump of the hydraulic booster of a steering
4.3.2. Check and adjustment of a tension of a belt of a drive of the compressor of the conditioner
4.3.3. Check of a belt of a drive газораспределительного the mechanism
4.3.4. Oil replacement in the engine and the oil filter
4.3.5. Clearing of system of ventilation картера
4.3.6. Check of hoses and connections of system of cooling
4.3.7. Check of system of release of the fulfilled gases
4.3.8. Tightness check топливопроводов
4.3.9. Replacement of the fuel filter
4.3.10. Replacement of a filtering element of the air filter
4.3.11. Check and adjustment of a drive of deenergizing of coupling
4.3.12. Check of level and доливка oils in a transmission
4.3.13. Check of protective covers of drives of forward wheels
4.3.14. Check of a technical condition of details of a forward suspension bracket on the car
4.3.15. Check of a technical condition of details of a back suspension bracket on the car
4.3.16. Check and adjustment of corners of installation of wheels
4.3.17. Survey and steering check on the car
4.3.18. Free wheeling check (люфта) a steering wheel
4.3.19. Check of tightness of a hydrodrive of brakes
4.3.20. Check of degree of deterioration brake колодок, disks and drums
4.3.21. Check of work of the vacuum amplifier of brakes
4.3.22. Check of an overall performance of brake system
4.3.23. Check of a lay brake
4.3.24. Service of the storage battery
4.3.25. Replacement and service of spark plugs
4.3.26. Check and adjustment of light of headlights
4.3.27. Greasing of armature of a body
4.3.28. Procleaning of drainage apertures
4.4. The second maintenance service (ТО-2)
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





4-3-21-proverka-raboty-vakuumnogo-usilitelya-tormozov.html

4.3.21. Check of work of the vacuum amplifier of brakes

At failure of the vacuum amplifier the effort to brake pedals considerably increases that negatively affects driving.
If the effort to pedals at braking has considerably increased in comparison with usual, check up the amplifier of brakes on the motionless car.
It be required to you: keys on 17, on 19, пассатижи, a rubber pear.
1. At the idle engine press five-six times a brake pedal. Keeping a brake pedal in the pressed position, start up the engine. The brake pedal should move forward. If it has not occurred, check up...
2.... Density of landing of a vacuum hose on unions of an inlet pipe...
3.... And the vacuum amplifier.

    
THE NOTE
Easing of fastenings and damage of details is not supposed. The weakened fastenings tighten, the damaged details replace.

4. For check of the return valve remove a vacuum hose in gathering.
5. Compress пассатижами the unbent short moustaches of a collar of fastening of a hose to the union of the vacuum amplifier and shift a collar on a hose.
6. Remove a hose from the union of the vacuum amplifier.
7. Similarly disconnect the second end of a vacuum hose from the union of an inlet pipe and remove a hose in gathering with the return valve.
8. Densely insert a pear nouse into that end of a vacuum hose by which the hose was connected to the vacuum amplifier, and compress it. Air should leave a pear through the valve.
9. Release a pear. If it remained in the compressed condition, means, the valve is serviceable. Otherwise replace the valve. In the absence of a pear it is possible to blow the valve a mouth.
10. If the return valve passes air in both directions, replace a vacuum hose in gathering with the valve.
11. Establish details in an order, the return to removal.

The previous page
4.3.20. Check of degree of deterioration brake колодок, disks and drums
The following page
4.3.22. Check of an overall performance of brake system