Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
4.1. General provisions
4.2. Daily service (ЕО)
4.3. The first maintenance service (ТО-1)
4.3.1. Check and adjustment of a tension of a belt of a drive of the generator and the pump of the hydraulic booster of a steering
4.3.2. Check and adjustment of a tension of a belt of a drive of the compressor of the conditioner
4.3.3. Check of a belt of a drive газораспределительного the mechanism
4.3.4. Oil replacement in the engine and the oil filter
4.3.5. Clearing of system of ventilation картера
4.3.6. Check of hoses and connections of system of cooling
4.3.7. Check of system of release of the fulfilled gases
4.3.8. Tightness check топливопроводов
4.3.9. Replacement of the fuel filter
4.3.10. Replacement of a filtering element of the air filter
4.3.11. Check and adjustment of a drive of deenergizing of coupling
4.3.12. Check of level and доливка oils in a transmission
4.3.13. Check of protective covers of drives of forward wheels
4.3.14. Check of a technical condition of details of a forward suspension bracket on the car
4.3.15. Check of a technical condition of details of a back suspension bracket on the car
4.3.16. Check and adjustment of corners of installation of wheels
4.3.17. Survey and steering check on the car
4.3.18. Free wheeling check (люфта) a steering wheel
4.3.19. Check of tightness of a hydrodrive of brakes
4.3.20. Check of degree of deterioration brake колодок, disks and drums
4.3.21. Check of work of the vacuum amplifier of brakes
4.3.22. Check of an overall performance of brake system
4.3.23. Check of a lay brake
4.3.24. Service of the storage battery
4.3.25. Replacement and service of spark plugs
4.3.26. Check and adjustment of light of headlights
4.3.27. Greasing of armature of a body
4.3.28. Procleaning of drainage apertures
4.4. The second maintenance service (ТО-2)
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








4-3-23-proverka-stoyanochnogo-tormoza.html

4.3.23. Check of a lay brake

The lay brake should keep the car on a bias of 25 % at lever moving in car salon on 7–9 teeth (clicks) of the ratchet device.

Fig. 4.5. Check of a lay brake

1. For check of correctness of adjustment of a lay brake find near to a parking lot of your car a platform or a loading ramp in height H = 1,25 m at length of entrance L = 5 m (fig. 4.5). Such parity corresponds to a bias of 25 %.
2. In the absence of such ramp for the simplified check of a lay brake put the car on an equal platform. The gear change lever establish in neutral position, lift completely the lever of a lay brake. Leave the car and try to get it moving forward. If it was possible to you, it is necessary to adjust urgently a drive of a lay brake («Adjustment of a drive of a lay brake» see).

«The previous page
4.3.22. Check of an overall performance of brake system
The following page»
4.3.24. Service of the storage battery











cf8e4909