Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
6.1. Coupling
6.2. A transmission
6.2.1. Features of a design
6.2.2. Possible malfunctions of a transmission, their reason and ways of elimination
6.2.3. Oil replacement in a transmission
6.2.4. Replacement of epiploons of a transmission
6.2.5. Removal and transmission installation
6.2.6. Dismantling and assemblage of a transmission and дефектовка its details
6.2.7. Repair of a secondary shaft
6.2.8. Repair of a primary shaft
6.2.9. Synchronizer repair
6.2.10. Differential repair
6.2.11. Repair of the mechanism of a gear change
6.2.12. Repair of hinges of a drive of a gear change
6.2.13. Removal, installation and repair of a side scene of a control lever by a transmission
6.2.14. Adjustment of a drive of management by a transmission
6.3. Drives of forward wheels
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








6-2-4-zamena-salnikov-korobki-peredach.html

6.2.4. Replacement of epiploons of a transmission

It be required to you: a face head «on 10», вороток with the extension piece, a screw-driver with a flat edge, a hammer, оправка.
1. For replacement of an epiploon of a semiaxis remove a wheel drive of from outside replaced epiploon (Removal and installation of drives of forward wheels »see«).
2. Take an epiploon a screw-driver.
3. Grease a working edge of a new epiploon трансмиссионным with oil and запрессуйте it оправкой suitable diameter a working edge in a box.
4. An epiploon of a primary shaft replace on the transmission removed from the car after removal of the bearing of deenergizing of coupling (Replacement of a plug and the bearing of deenergizing of coupling »see«). Turn out three bolts of fastening of the directing plug of the bearing of deenergizing of coupling …
5. … also remove directing plug.
6. Оправкой suitable diameter (for example, a face head «on 26») выпрессуйте an epiploon …
7. … also take it from the plug.
8. Grease a working edge of a new epiploon трансмиссионным with oil and запрессуйте it in the plug of the same оправкой, сориентировав so that at plug installation the working edge of an epiploon has been directed in a transmission.
9. Establish details in an order, the return to removal.

    
THE NOTE
For replacement of an epiploon of a shaft of a gear change it is necessary to remove and disassemble the gear change mechanism («Repair of the mechanism of a gear change» see).

«The previous page
6.2.3. Oil replacement in a transmission
The following page»
6.2.5. Removal and transmission installation











cf8e4909