Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
6.1. Coupling
6.2. A transmission
6.3. Drives of forward wheels
6.3.1. Features of a design
6.3.2. Possible malfunctions of drives of forward wheels, their reasons and ways of elimination
6.3.3. Removal and installation of drives of forward wheels
6.3.4. Replacement of hinges of equal angular speeds
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





6-3-3-snyatie-i-ustanovka-privodov-perednikh-koles.html

6.3.3. Removal and installation of drives of forward wheels

Drives of forward wheels remove for their replacement at damage or for replacement of hinges. Besides, drives of forward wheels should be removed for access reception to other units.
It be required to you: a key on 19, a face head on 32, динамометрический a key, a key for bolts of wheels, a screw-driver with a flat edge, a stripper of spherical hinges, an assembly shovel.
1. Loosen the an inhaling of a nut of a nave of a forward wheel.
2. Loosen the an inhaling of bolts of fastening of a wheel, then lift a forward part of the car and establish on reliable support.
3. Remove a wheel, turn away a nave nut …
4. … also remove a persistent washer, having hooked a screw-driver.
5. Remove a spring clamp of a nut of a finger of a spherical support, turn away a nut and выпрессуйте a finger a stripper (Replacement of a spherical support absorber racks see).
6. Take a telescopic rack aside a little and take from a nave a shaft of the external hinge of equal angular speeds.

    
GOOD ADVICE
If it is not possible to take a shaft of the hinge effort of hands, beat out it from a nave easy blows of a hammer through the wooden prorate.

    
THE NOTE
At drive removal probably вытекание for a part of oil from a transmission, therefore prepare capacity for oil gathering.

7. Having rested an assembly shovel in картер transmissions through the wooden prorate, выпрессуйте the internal hinge of a drive from a semiaxial gear wheel …
8. … also remove a drive of a forward wheel in gathering.
    
THE PREVENTION
Replace a lock ring of a shaft of the internal hinge with a new ring at each removal of a drive from the car.

9. Establish a drive and the removed details in an order, the return to removal. A nave nut definitively tighten on the car standing on the earth, the moment specified in the appendix 1.
10. After an inhaling stop a nut with бородком and a hammer.
11. The second drive replace similarly.
12. After installation of all details check up oil level in a transmission and if necessary add (Check of level and доливка oils in a transmission see.

The previous page
6.3.2. Possible malfunctions of drives of forward wheels, their reasons and ways of elimination
The following page
6.3.4. Replacement of hinges of equal angular speeds