Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position ВМТ of a step of compression
5.6. Removal, installation and дефектовка a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.13. System of release of the fulfilled gases
5.13.1. Features of a design
5.13.2. Replacement of pillows of a suspension bracket of system of release of the fulfilled gases
5.13.3. Replacement of the basic muffler
5.13.4. Replacement of the additional muffler
5.13.5. Replacement of neutralizer of the fulfilled gases or the prorate
5.13.6. Replacement of a reception pipe
5.13.7. Removal and installation of thermoscreens
5.14. The engine power supply system
5.15. System of catching of steams of fuel
5.16. System рециркуляции the fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








5-13-7-snyatie-i-ustanovka-termoehkranov.html

5.13.7. Removal and installation of thermoscreens

In an operating time of the engine the system of release of the fulfilled gases heats up to a heat. Therefore at strong mechanical damage or considerable corrosion of the thermoscreens established on elements of system, necessarily replace them. Besides decrease in level of comfort in salon, malfunction of thermoscreens can lead to ignition of a thermonoise isolation of a body floor as neutralizer of the fulfilled gases heats up to temperature over 600 wasps.
For removal of the thermoscreen of a final collector execute the following.
1. Turn out three bolts of fastening of the thermoscreen …
    
THE NOTE
The bottom bolt of the thermoscreen of a final collector can to be turned out completely. It is enough to turn out of it on some turns.

2. … also remove the thermoscreen of a final collector.
3. Establish the thermoscreen of a final collector in an order, the return to removal.

For removal of the thermoscreen of the basic muffler execute the following.
1. Turn out four bolts of fastening of the thermoscreen to the body basis …
2. … wring out the basic muffler downwards so, elasticity of pillows how much allows, and remove the thermoscreen.

    
THE PREVENTION
Edges of the thermoscreen the sharp. At its removal protect hands from traumas rags or gloves.

3. Establish the thermoscreen of the basic muffler in an order, the return to removal.

For removal of the thermoscreen of the additional muffler execute the following.
1. Disconnect pillows of a suspension bracket of system from arms of the additional muffler («Replacement of the additional muffler» see), a reception pipe («Replacement of a reception pipe» see) and from a forward arm of the basic muffler («Replacement of the basic muffler» see).
2. Turn away four nuts of fastening of the thermoscreen of the additional muffler to the body basis …
3. … also remove the thermoscreen, having wrung out the additional muffler downwards so, elasticity of system how much allows.

THE PREVENTION
Edges of the thermoscreen the sharp. At its removal protect hands from traumas rags or gloves.

4. Establish the thermoscreen of the additional muffler in an order, the return to removal.

For removal of the thermoscreen of neutralizer execute the following.
1. Disconnect pillows of a suspension bracket of system from arms of the additional muffler («Replacement of the additional muffler» see), a reception pipe («Replacement of a reception pipe» see) and from a forward arm of the basic muffler («Replacement of the basic muffler» see).
2. Turn away four nuts of fastening of the thermoscreen of neutralizer to the body basis …
3. … also remove the thermoscreen, having wrung out neutralizer downwards so, elasticity of system how much allows.

THE PREVENTION
Edges of the thermoscreen the sharp. At its removal protect hands from traumas rags or gloves.

4. Establish the neutralizer thermoscreen in an order, the return to removal.

«The previous page
5.13.6. Replacement of a reception pipe
The following page»
5.14. The engine power supply system











cf8e4909