Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position ВМТ of a step of compression
5.6. Removal, installation and дефектовка a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.13. System of release of the fulfilled gases
5.13.1. Features of a design
5.13.2. Replacement of pillows of a suspension bracket of system of release of the fulfilled gases
5.13.3. Replacement of the basic muffler
5.13.4. Replacement of the additional muffler
5.13.5. Replacement of neutralizer of the fulfilled gases or the prorate
5.13.6. Replacement of a reception pipe
5.13.7. Removal and installation of thermoscreens
5.14. The engine power supply system
5.15. System of catching of steams of fuel
5.16. System рециркуляции the fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








5-13-5-zamena-nejjtralizatora-otrabotavshikh-gazov-ili-prostavki.html

5.13.5. Replacement of neutralizer of the fulfilled gases or the prorate

1. Turn away three nuts of fastening of a flange of a pipe of the additional muffler to a neutralizer flange (or prorates), disconnect the additional muffler from neutralizer and remove a sealing lining (subitem 2 and 4 subsections «Replacement of the additional muffler» see).
2. Turn away three nuts of fastening of a flange of a reception pipe to a flange of neutralizer of the fulfilled gases (or to a prorate flange)...
3. … also remove neutralizer (prorate).
4. Remove from flanges of neutralizer (prorate) sealing linings.

GOOD ADVICE
Sealing linings between flanges of neutralizer (prorate), a pipe of the additional muffler and a reception pipe at each dismantling of connection replace new.

5. Establish new neutralizer (prorate) in an order, the return to removal.

«The previous page
5.13.4. Replacement of the additional muffler
The following page»
5.13.6. Replacement of a reception pipe











cf8e4909