Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position ВМТ of a step of compression
5.6. Removal, installation and дефектовка a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.13. System of release of the fulfilled gases
5.13.1. Features of a design
5.13.2. Replacement of pillows of a suspension bracket of system of release of the fulfilled gases
5.13.3. Replacement of the basic muffler
5.13.4. Replacement of the additional muffler
5.13.5. Replacement of neutralizer of the fulfilled gases or the prorate
5.13.6. Replacement of a reception pipe
5.13.7. Removal and installation of thermoscreens
5.14. The engine power supply system
5.15. System of catching of steams of fuel
5.16. System рециркуляции the fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








5-13-4-zamena-dopolnitelnogo-glushitelya.html

5.13.4. Replacement of the additional muffler

1. Turn on two nuts of fastening of a pipe of the additional muffler to a pipe of the basic muffler and remove established between flanges of pipes a sealing lining (subsection subitem 1-3 «Replacement of the basic muffler» see).
2. Turn away three nuts of fastening of a flange of its pipe to a neutralizer flange.
3. Supporting the additional muffler, remove from its arms two pillows …
4. … and, having removed a flange of a pipe of the muffler from neutralizer hairpins, remove the additional muffler and a sealing lining.

GOOD ADVICE
Sealing lining between flanges of neutralizer and a pipe of the additional muffler at each dismantling of connection replace new.

5. Establish the new additional muffler in an order, the return to removal.

«The previous page
5.13.3. Replacement of the basic muffler
The following page»
5.13.5. Replacement of neutralizer of the fulfilled gases or the prorate











cf8e4909