Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position ВМТ of a step of compression
5.6. Removal, installation and дефектовка a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.12.1. Features of a design
5.12.2. Possible malfunctions of system of cooling, their reason and ways of elimination
5.12.3. Removal and installation of electrofans of a radiator of system of cooling of the engine
5.12.4. Replacement of a radiator of system of cooling
5.12.5. Replacement of the water pump
5.12.6. Removal and thermostat installation
5.12.7. Removal and installation of a broad tank
5.13. System of release of the fulfilled gases
5.14. The engine power supply system
5.15. System of catching of steams of fuel
5.16. System рециркуляции the fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








5-12-3-snyatie-i-ustanovka-ehlektroventilyatorov-radiatora-sistemy-okhlazhdeniya-dvigatelya.html

5.12.3. Removal and installation of electrofans of a radiator of system of cooling of the engine

The face head «on 10» is required to you.
1. Disconnect a wire from the plug "minus" of the storage battery.
2. Separate pad a plait of wires of the basic electrofan, having pressed a spring clamp.
3. Turn out two top bolts …
4. … and one bottom bolt of fastening of a casing of the electrofan to a radiator also remove the basic electrofan with a casing in gathering, having deduced the emphasis of a casing located below on the right, from an arm on a radiator.
5. For removal of the additional electrofan separate pad its plait of wires to similarly how it did before removal of the basic electrofan (see item 2).
6. Turn out two bolts of fastening of a casing of the electrofan to a radiator …
7. … also remove the additional electrofan with a casing in gathering, having deduced the emphasis of a casing located below on the right and at the left, from arms on a radiator.
8. Establish electrofans in an order, the return to removal.

«The previous page
5.12.2. Possible malfunctions of system of cooling, their reason and ways of elimination
The following page»
5.12.4. Replacement of a radiator of system of cooling











cf8e4909