5.7.1. Replacement of a lining of a cover of a head of the block of cylinders

If the leak of oil from under a cover of a head of the block of cylinders did not manage to be eliminated a tightening of bolts of fastening of a cover, replace its lining.

It be required to you: a key on 10, a screw-driver with a flat edge, пассатижи.

1. Loosen the a collar of fastening of a hose of system of ventilation картера the engine to a branch pipe of a cover of a head of the block of cylinders, having compressed пассатижами its unbent ears, shift a collar on a hose …	2. … also disconnect a hose from a cover.

3. Turn out eight bolts of fastening of a cover of a head of the block of cylinders …	4. … also uncover.

5. Take a lining from grooves of a cover and examine. Strongly pressed out, hardened or torn lining replace.	6. Carefully clear привалочные surfaces of the case of a camshaft and a cover of a head of the block of cylinders of the lining and hermetic rests (at its presence).

    

GOOD ADVICE For the best hermetic sealing before installation of a new lining apply a thin film hermetic on привалочную a case surface. After clearing привалочную a surface of the case do not degrease. It will allow in case of hermetic application further without difficulties to uncover.

7. Lay a lining in grooves of a cover of a head of the block of cylinders.

8. Establish a cover of a head of the block of cylinders and all removed details in an order, the return to removal. Bolts of fastening of a cover tighten in regular intervals cross-wise the moment specified in the appendix 1.