Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
9.1. Features of a design
9.2. Possible malfunctions of brake system, their reason and ways of elimination
9.3. Prorolling of a hydrodrive of brake system
9.4. Check and adjustment of position of a pedal of a brake
9.5. The main brake cylinder
9.6. The vacuum amplifier of brakes
9.7. Replacement of hoses and tubes of a hydrodrive of brakes
9.8. Removal and installation of a pedal of a brake
9.9. Brake mechanisms of forward wheels
9.9.1. Replacement brake колодок the brake mechanism of a forward wheel
9.9.2. Replacement of a support of the forward brake mechanism
9.9.3. Replacement of a brake disk
9.10. Brake mechanisms of back wheels
9.11. A lay brake
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





9-9-2-zamena-supporta-perednego-tormoznogo-mekhanizma.html

9.9.2. Replacement of a support of the forward brake mechanism

It be required to you: a key on 12, a key-shestigrannik on 10, a key for bolts of wheels, capacity for plum of a brake liquid.
1. Remove a wheel.
2. Turn out a bolt-union and disconnect from cуппорта a brake hose (Replacement of brake hoses see).

    
GOOD ADVICE
Substitute capacity for plum of the rest of a brake liquid from a hose and the cylinder.

3. Turn out two bolts of fastening directing колодок to a rotary fist …
4. … also remove a support in gathering.
5. Establish a support in an order, the return to removal. Before installation of bolts of fastening of a support to a rotary fist put on a carving анаэробный a carving clamp. At installation of a brake hose use only new copper washers. After installation restore level of a brake liquid in a tank of the main brake cylinder and remove air from a hydrodrive of brakes (Prorolling of a hydrodrive of brake system see).

The previous page
9.9.1. Replacement brake колодок the brake mechanism of a forward wheel
The following page
9.9.3. Replacement of a brake disk