Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
9.1. Features of a design
9.2. Possible malfunctions of brake system, their reason and ways of elimination
9.3. Prorolling of a hydrodrive of brake system
9.4. Check and adjustment of position of a pedal of a brake
9.5. The main brake cylinder
9.6. The vacuum amplifier of brakes
9.7. Replacement of hoses and tubes of a hydrodrive of brakes
9.8. Removal and installation of a pedal of a brake
9.9. Brake mechanisms of forward wheels
9.10. Brake mechanisms of back wheels
9.11. A lay brake
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





9-3-prokachka-gidroprivoda-tormoznojj-sistemy.html

9.3. Prorolling of a hydrodrive of brake system

Hydrodrive of brakes pump over for removal of air which has got there at filling by a liquid after its replacement or after repair of knots of a hydrodrive, connected with its depressurization.
Signs of presence of air in a hydrodrive:
– Increase in a course of a pedal, its "softness" by unitary pressing a pedal;
– Gradual reduction of a course of a pedal with simultaneous increase in its "rigidity" by repeated pressing a pedal.
Before hydrodrive prorolling it is necessary to find out and eliminate the depressurization reason.

GOOD ADVICE
If hydrodrive prorolling is connected with repair of any one contour and serviceability of other contour prorolling only a repaired contour is admissible is obviously known.

Actions at hydrodrive prorolling same, as well as at replacement of the brake liquid described in section 4 "Maintenance service" (Replacement of a working liquid in hydrodrives of brakes and coupling deenergizings see). Distinction consists only that criterion of end of prorolling of the working cylinder is the termination of an exit of vials of air from a hose, instead of occurrence of a fresh brake liquid.

The previous page
9.2. Possible malfunctions of brake system, their reason and ways of elimination
The following page
9.4. Check and adjustment of position of a pedal of a brake