Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
9.1. Features of a design
9.2. Possible malfunctions of brake system, their reason and ways of elimination
9.3. Prorolling of a hydrodrive of brake system
9.4. Check and adjustment of position of a pedal of a brake
9.5. The main brake cylinder
9.6. The vacuum amplifier of brakes
9.7. Replacement of hoses and tubes of a hydrodrive of brakes
9.7.1. Replacement of brake hoses
9.7.2. Replacement of brake tubes
9.8. Removal and installation of a pedal of a brake
9.9. Brake mechanisms of forward wheels
9.10. Brake mechanisms of back wheels
9.11. A lay brake
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





9-7-zamena-shlangov-i-trubok-gidroprivoda-tormozov.html

9.7. Replacement of hoses and tubes of a hydrodrive of brakes




Replace hoses and tubes if on them damages are found out. Besides, we recommend to replace in the preventive purposes hoses through each 100 thousand in km of run or 5 years of operation of the car (depending on that will come earlier) even if they outwardly are not damaged. Rubber of hoses grows old, and they can unexpectedly burst at braking.
The previous page
9.6.1. Replacement of the vacuum amplifier of brakes		 The following page
9.7.1. Replacement of brake hoses