Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
9.1. Features of a design
9.2. Possible malfunctions of brake system, their reason and ways of elimination
9.3. Prorolling of a hydrodrive of brake system
9.4. Check and adjustment of position of a pedal of a brake
9.5. The main brake cylinder
9.6. The vacuum amplifier of brakes
9.7. Replacement of hoses and tubes of a hydrodrive of brakes
9.8. Removal and installation of a pedal of a brake
9.9. Brake mechanisms of forward wheels
9.10. Brake mechanisms of back wheels
9.11. A lay brake
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








9-8-snyatie-i-ustanovka-pedali-tormoza.html

9.8. Removal and installation of a pedal of a brake

Brake pedal remove for replacement of plastic plugs of its axis and the plug of a finger of a plug of a pusher of the vacuum amplifier of brakes at occurrence of a scratch, jamming or increased люфте, and also for replacement of a returnable spring at its damage.
It be required to you: keys «on 14», «on 15», пассатижи, a screw-driver.
1. In salon under the panel of devices disconnect from an arm of a pedal of a brake the stoplight switch (Replacement of gauges and switches »see«).
2. Disconnect from a pedal of a brake a pusher of the vacuum amplifier of brakes. For this purpose пассатижами remove a lock washer of a finger of a plug of a pusher …
3. … also take a finger from plug and pedal apertures.
4. Take an axis of a pedal of a brake the same as it did at removal of a pedal of coupling (subitem 3 both 4 «Removal and installation of a pedal of coupling» see), and remove a pedal.
5. If necessary remove a returnable spring, having deduced its unbent ends from arm apertures.
6. Remove from a pedal the plug of 1 finger and two plugs of 2 axes.
7. Establish a pedal of a brake and all removed details in an order, the return to removal.

«The previous page
9.7.2. Replacement of brake tubes
The following page»
9.9. Brake mechanisms of forward wheels











cf8e4909