Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
6.1. Coupling
6.1.1. Features of a design
6.1.2. Removal and coupling installation
6.1.3. Replacement of a plug and the bearing of deenergizing of coupling
6.1.4. Replacement of the main cylinder of a drive of deenergizing of coupling
6.1.5. Replacement of the working cylinder of a drive of deenergizing of coupling
6.1.6. Replacement of a hose and a tube of a hydrodrive of deenergizing of coupling
6.1.7. Removal and installation of a pedal of coupling
6.1.8. Prorolling of a hydrodrive of deenergizing of coupling
6.2. A transmission
6.3. Drives of forward wheels
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








6-1-7-snyatie-i-ustanovka-pedali-scepleniya.html

6.1.7. Removal and installation of a pedal of coupling

Coupling pedal remove for replacement of plastic plugs of its axis and the plug of a finger of a plug of a pusher of the main cylinder of a drive of deenergizing of coupling at occurrence of a scratch, jamming or at increased люфте, and also for replacement of a returnable spring at its damage.
It be required to you: two keys «on 15», пассатижи.
1. Disconnect from a pedal of coupling a pusher of the main cylinder of a drive of deenergizing of coupling. For this purpose пассатижами remove a lock washer of a finger of a plug of a pusher …
2. … also take a finger from plug and pedal apertures.
3. Keeping a key an axis of a pedal from проворачивания, turn on a key and an axis nut.
4. Take an axis from pedal and arm apertures …
5. … also remove a pedal, having deduced a groove and the lever of a pedal from gearing with a returnable spring
.
6. If necessary remove a returnable spring, having deduced its unbent ends from arm apertures.
7. Remove from a pedal the finger plug …
8. … and two plugs of an axis.
9. Establish details in an order, the return to removal.

    
THE PREVENTION
At installation of a pedal of coupling track that the groove and (item 5 photo see) the pedal lever would enter into gearing with a returnable spring.


«The previous page
6.1.6. Replacement of a hose and a tube of a hydrodrive of deenergizing of coupling
The following page»
6.1.8. Prorolling of a hydrodrive of deenergizing of coupling











cf8e4909