Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
6.1. Coupling
6.1.1. Features of a design
6.1.2. Removal and coupling installation
6.1.3. Replacement of a plug and the bearing of deenergizing of coupling
6.1.4. Replacement of the main cylinder of a drive of deenergizing of coupling
6.1.5. Replacement of the working cylinder of a drive of deenergizing of coupling
6.1.6. Replacement of a hose and a tube of a hydrodrive of deenergizing of coupling
6.1.7. Removal and installation of a pedal of coupling
6.1.8. Prorolling of a hydrodrive of deenergizing of coupling
6.2. A transmission
6.3. Drives of forward wheels
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








6-1-4-zamena-glavnogo-cilindra-privoda-vyklyucheniya-scepleniya.html

6.1.4. Replacement of the main cylinder of a drive of deenergizing of coupling

It be required to you: keys «on 10», a face head «on 13», a special key «on 10» for nuts of pipelines, the extension piece, вороток, пассатижи.
1. Turn away a stopper of a tank and pump out (for example, the big medical syringe) a brake liquid from section of a tank of the main brake cylinder, feeding a hydrodrive of deenergizing of coupling.

THE NOTE
The tank, the general for the main cylinders of brakes and coupling deenergizing, has three separate sections: two for separate contours of a hydrodrive of brakes and one for a hydrodrive of deenergizing of coupling.

2. Remove a broad tank of system of cooling of the engine (Removal and installation of a broad tank »see«).
    
THE NOTE
The broad tank of system of cooling of the engine is necessary for removing for access reception to the main cylinder of a drive of deenergizing of coupling. The tank can to be removed completely, it is enough to turn on two nuts of its fastening and to take a tank aside, without disconnecting from it hoses and without merging cooling liquid.

3. Пассатижами compress the unbent ears of a collar, shift a collar along a feeding hose …
4. … also disconnect a hose from the main cylinder.
5. Turn away a nut of fastening of a tube of a hydrodrive of deenergizing of coupling to the main cylinder …
6. … also take a tube aside.
7. In car salon under the panel of devices disconnect from a pedal of coupling a pusher of the main cylinder (Removal and installation of a pedal of coupling »see«).
8. Turn on two nuts of fastening of the main cylinder of a drive of deenergizing of coupling to a body …
9. … also remove the main cylinder.
10. Establish details in an order, the return to removal, and remove air from a hydrodrive («Prorolling of a hydrodrive of deenergizing of coupling» see).
11. Check up work of a drive and if necessary adjust a course of a pedal of coupling (Check and adjustment of a drive of deenergizing of coupling »see«).

«The previous page
6.1.3. Replacement of a plug and the bearing of deenergizing of coupling
The following page»
6.1.5. Replacement of the working cylinder of a drive of deenergizing of coupling











cf8e4909