11.9.15. Replacement of the lock of a back door

It be required to you: key TORX T40, a screw-driver with a crosswise edge.

1. Remove an upholstery of a back door and влагозащитную a film (Removal and installation of an upholstery of a back door see).

2. Remove the external handle of a back door (Replacement of the external handle of a back door see).

3. Remove the internal handle of a drive of the lock of a back door (Replacement of the internal handle of a drive of the lock of a back door see).

THE NOTE To remove external and internal handles it is necessary because to disconnect draughts of a drive from the lock established on a door, very inconveniently. It is more convenient to remove the lock together with draughts, and in turn for a detachment of draughts from handles their removal is required.

4. Turn out three screws of fastening of the lock to the door panel.	5. Remove the lock from the car, having deduced it through a technological aperture in the door panel.

6. If change the lock, unfasten plastic clamps of draughts …	7. … also disconnect from levers of the lock of draught from the internal handle of a drive of the lock …

8. … and draught from the external handle.	9. For removal of a latch of the lock of a door turn out two screws of its fastening to a body rack …

10. … also remove a latch together with an intensifying plate.

11. Will put the lock of a back door and all removed details in an order, the return to removal.

THE NOTE If necessary adjust clearness of lock-out of the lock latch moving, having weakened screws of its fastening.