Chevrolet Lanos (since 2004 of release)
	1. The car device
	2. Recommendations about operation
	3. Malfunctions in a way
	4. Maintenance service
	5. The engine
	6. Transmission
	7. A running gear
	8. A steering
	9. Brake system
	10. An electric equipment
	11. A body
		11.1. Features of a design
		11.2. Possible malfunctions of a body, their reason and ways of elimination
		11.3. Removal, dismantling and installation of bumpers
		11.4. Removal and installation of facing of a radiator
		11.5. Removal and installation of mudguards of wheels and Lockers
		11.6. Removal and installation of a forward wing
		11.7. Removal and installation of a lattice of a box air flow
		11.8. A cowl
		11.9. Doors
			11.9.1. Removal and installation of an upholstery of a forward door
			11.9.2. Replacement of glass of a forward door
			11.9.3. Replacement стеклоподъемника a forward door
			11.9.4. Replacement of the external handle of a forward door
			11.9.5. Replacement of the internal handle of a drive of the lock of a forward door
			11.9.6. Replacement of the switch of the lock of a forward door
			11.9.7. Replacement of the lock of a forward door
			11.9.8. Replacement of the terminator of opening of a forward door
			11.9.9. Removal and installation of a forward door
			11.9.10. Removal and installation of an upholstery of a back door
			11.9.11. Replacement of glass of a back door
			11.9.12. Replacement стеклоподъемника a back door
			11.9.13. Replacement of the external handle of a back door
			11.9.14. Replacement of the internal handle of a drive of the lock of a back door
			11.9.15. Replacement of the lock of a back door
			11.9.16. Replacement of the terminator of opening of a back door
			11.9.17. Removal and installation of a back door
		11.10. A luggage carrier cover
		11.11. A cover of the hatch of a bulk pipe of a fuel tank
		11.12. Seats
		11.13. Removal and installation of facing of a tunnel of a floor
		11.14. System of passive safety (SRS)
		11.15. Rear-view mirrors
		11.16. The panel of devices
		11.17. A heater and the conditioner
		11.18. Salon armature
		11.19. Removal and installation of facings of salon
		11.20. Removal and installation of facings of a luggage carrier
		11.21. A screen wiper of a wind window
		11.22. Replacement motionless glazing bodies
		11.23. Removal and installation of a shelf of fastening of the storage battery
		11.24. Care of a body
	12. Wheels and tyres
	13. Purchase of spare parts
	14. A trip on HUNDRED
	15. Winter operation of the car
	16. Preparation for checkup
	17. Councils to the beginning mechanic
	18. Appendices
	19. Electric equipment schemes

11-9-14-zamena-vnutrennejj-ruchki-privoda-zamka-zadnejj-dveri.html

11.9.14. Replacement of the internal handle of a drive of the lock of a back door

The screw-driver with a crosswise edge is required to you.

1. Remove an upholstery of a back door and влагозащитную a film (Removal and installation of an upholstery of a back door see).


2. Turn out the screw of fastening of the internal handle to the door panel …	3. … shift the internal handle forward and take from a door in gathering with draughts.


4. Take draughts from the holder …	5. … disconnect draughts from levers of the internal handle and remove the handle.

6. Establish the internal handle and all removed details in an order, the return to removal.

The previous page
11.9.13. Replacement of the external handle of a back door

The following page
11.9.15. Replacement of the lock of a back door