Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position ВМТ of a step of compression
5.6. Removal, installation and дефектовка a flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.13. System of release of the fulfilled gases
5.14. The engine power supply system
5.15. System of catching of steams of fuel
5.15.1. Features of the device
5.15.2. Removal, installation and check of the valve of a purge of an adsorber
5.15.3. Removal and adsorber installation
5.16. System рециркуляции the fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





5-15-3-snyatie-i-ustanovka-adsorbera.html

5.15.3. Removal and adsorber installation

Adsorber of system of catching of steams of fuel remove for check or replacement at occurrence of a proof smell of the gasoline, caused it негерметичностью. Besides, infringement of tightness of an adsorber can become the reason of unstable work of the engine idling up to its stop.
The adsorber is established in a protective casing on the basis of a body on the right behind.
It be required to you: a key on 10, пассатижи, a screw-driver with a crosswise edge, бокорезы.
1. Separate the pipeline of ventilation of a fuel tank, having compressed its clamps.
2. Similarly separate the pipeline of tap of steams of fuel in an inlet pipe.
3. Have a bite бокорезами (or knife) a collar of fastening of hoses and pipelines as it keeps a hose of tap of steams of fuel from an adsorber in an inlet pipe.
    
THE NOTE
Collar of fastening of hoses and pipelines of disposable use.

4. Turn out a bolt of fastening of a casing of an adsorber to an arm on the basis of a body …
5. … shift an adsorber on directing an arm forward in a direction of movement of the car …
6. … also remove an adsorber from the car, extending its atmospheric hose downwards from a protective casing of a bulk pipe of a fuel tank.
7. In need of adsorber replacement turn out three screws of fastening of a cover of its casing …
8. … also cast away a cover.
9. Having compressed clamps of steam hoses, remove their tips from adsorber branch pipes …
10. … also take hoses from its casing.
11. Loosen the a collar of fastening of an atmospheric hose, having compressed пассатижами its unbent ears, shift a collar on a hose …
12. … also remove a hose from an adsorber branch pipe.
13. Take an adsorber from a casing.
14. Remove from an adsorber branch pipe the rubber sealing plug of an atmospheric hose …
15. … or take the plug from a hose if it remained in it. Strongly hardened or cracked sealing plug replace.
16. Collect and establish an adsorber in an order, the return to dismantling and removal.

The previous page
5.15.2. Removal, installation and check of the valve of a purge of an adsorber
The following page
5.16. System рециркуляции the fulfilled gases