10.8.4. Replacement of the electroproof-reader of light of headlights

1. Disconnect a wire from the plug "minus" of the storage battery.

2. Remove a block headlight (block headlight Replacement see). A decorative overlay of a headlight do not remove.	3. Turn the electroproof-reader (counter-clockwise for the left headlight and clockwise for the right headlight) …

4. … also take it, having deduced a spherical tip from gearing with the plastic lever of a reflector.	5. Remove a sealing ring.

6. Establish the electroproof-reader in an order, the return to removal. At installation track, that the spherical tip of the electroproof-reader has entered into gearing with the reflector lever for what remove a back cover of a block headlight and hold the lever with a finger.

    

GOOD ADVICE Connect колодки a plait of wires, without establishing a headlight, connect a wire to the plug "minus" of the storage battery and check up work of the electroproof-reader: include near or a headlight of headlights. At rotation of a regulator of the electroproof-reader the light bunch of a headlight should move in a vertical direction. If the sound of work of the electroproof-reader is audible, and the light bunch does not move, most likely, the tip of the electroproof-reader has not entered into gearing with the reflector lever.

7. Establish details in an order, the return to removal. Check up correctness of adjustment of light of headlights and if necessary adjust it (Check and adjustment of light of headlights see).