Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
8.1. Features of a design
8.2. A steering column
8.3. Steering draughts
8.4. The steering mechanism
8.4.1. Prorolling of system of the hydraulic booster of a steering
8.4.2. Backlash adjustment in the steering mechanism
8.4.3. Replacement of a tank of the hydraulic booster of the steering mechanism
8.4.4. Replacement of the steering mechanism
8.4.5. Replacement of the pump of the hydraulic booster of a steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








8-4-5-zamena-nasosa-gidrousilitelya-rulevogo-upravleniya.html

8.4.5. Replacement of the pump of the hydraulic booster of a steering

It be required to you: keys «on 10», «on 12», «on 16», «on 22», a face head «on 12», a screw-driver with a flat edge, пассатижи.
1. Remove a belt of a drive of the generator and the pump of the hydraulic booster of a steering (Replacement of a belt of a drive of the generator and the pump of the hydraulic booster of a steering »see«).
2. Turn out three bolts of fastening of a pulley of the pump of the hydraulic booster, keeping a pulley of the pump from проворачивания a screw-driver …
3. … also remove a pulley.
4. Keeping the union from проворачивания, the second key turn away a pipeline nut …
5. … also take the pipeline from the union.

THE NOTE
Connection of the pipeline with the pump is condensed by a rubber ring with which it is necessary to replace at each separation.

6. Compress the unbent short moustaches of a collar пассатижами, shift a collar towards the pump …
7. … also remove a hose from a tube.

THE PREVENTION
Take measures against вытекания a working liquid from pipelines, having muffled them, for example, wooden stoppers.

8. Remove from a tube a collar.
9. Turn out two bolts of fastening of the pump of the hydraulic booster …
10. … also remove the pump from the car in gathering with the soaking up pipeline.
11. Turn out two bolts of fastening of a flange of the soaking up pipeline …
12. … also disconnect the pipeline from the pump case.

THE NOTE
Connection of the pipeline with the pump is condensed by a rubber ring with which it is necessary to replace at each separation.

13. Establish details in an order, the return to removal, and remove air from hydraulic booster system («Prorolling of system of the hydraulic booster of a steering» see).

«The previous page
8.4.4. Replacement of the steering mechanism
The following page»
9. Brake system











cf8e4909