7.1.9. Replacement of the bearing of a forward nave

It be required to you: a stripper of bearings, a stripper of lock rings, small beards, a hammer

    

GOOD ADVICE For bearing replacement it is convenient to use a stripper available on sale for выпрессовки and запрессовки bearings of naves.

    

NOTES Replacement of the bearing of a forward nave is more convenient for carrying out on removed from the car absorber to a rack. We recommend to replace bearings of both naves of forward wheels simultaneously.

1. Remove амортизаторную a rack of a forward suspension bracket (Removal and installation absorber racks see).

2. Clamp a rack in a vice and beat out a nave a hammer, using the mandrel suitable diameter (for example, a face head).	3. Remove a nave. Most likely, on a nave there will be an external half of internal ring of the bearing.

    

THE PREVENTION After removal of a nave the bearing for a reuse is not suitable, therefore it is necessary to replace it.

4. Take advantage of a stripper …	5. … to remove it from a nave.

6. Easy blows of a hammer through the mandrel besiege the bearing in a fist nest to release a lock ring.	7. Remove a lock ring of the bearing a stripper of lock rings.

8. Similarly remove the second ring.

9. Establish a stripper of bearings, выпрессуйте …	10. … also take the bearing from a fist.

11. In the absence of a stripper beat out the bearing, using the mandrel suitable diameter as выпрессованный the bearing is not subject to a reuse.

12. Clear details and grease an internal surface of a nest of a fist and an external surface of a nave with a thin layer of greasing Litol-24.

13. Establish an internal lock ring.

14. Запрессуйте the new bearing against the stop in a lock ring.

THE PREVENTION At запрессовке the bearing in the case of a rotary fist the effort should be put to an external ring of the bearing, otherwise the bearing can be damaged.

15. Establish an external lock ring in a flute of a nest of a fist.

16. Запрессуйте a nave in the bearing against the stop, having fixed a support an internal ring of the bearing.

    

THE PREVENTION If at запрессовке a nave not to fix a support an internal ring of the bearing it can be damaged.

17. Establish амортизаторную a rack on the car in an order, the return to removal.

18. Check up and if necessary adjust corners of installation of wheels. Take advantage of services of the workshops having the special equipment.