Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal, dismantling and installation of bumpers
11.3.1. Removal, dismantling and installation of a forward bumper
11.3.2. Removal, dismantling and installation of a back bumper
11.4. Removal and installation of facing of a radiator
11.5. Removal and installation of mudguards of wheels and Lockers
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice of a box air flow
11.8. A cowl
11.9. Doors
11.10. A luggage carrier cover
11.11. A cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Rear-view mirrors
11.16. The panel of devices
11.17. A heater and the conditioner
11.18. Salon armature
11.19. Removal and installation of facings of salon
11.20. Removal and installation of facings of a luggage carrier
11.21. A screen wiper of a wind window
11.22. Replacement motionless glazing bodies
11.23. Removal and installation of a shelf of fastening of the storage battery
11.24. Care of a body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





11-3-2-snyatie-razborka-i-ustanovka-zadnego-bampera.html

11.3.2. Removal, dismantling and installation of a back bumper

It be required to you: all tools necessary for removal of mudguards and Lockers of back wheels (Removal and installation of mudguards of wheels and Lockers ), facings of back lanterns see and the back panel (Removal and installation of facings of a luggage carrier see), and also a face head on 10, a screw-driver with a crosswise edge.
1. From both parties of the car remove mudguards and подкрылки back wheels (Removal and installation of mudguards of wheels and Lockers see).
2. Open a cover of a luggage carrier and remove facings of back lanterns and the back panel (Removal and installation of facings of a luggage carrier see).
3. From both parties of a luggage carrier turn away a nut and turn out bolts of fastening of the ends of a bumper to a body.
4. From within both arches of back wheels turn out on one bolt of fastening of the ends of a bumper to a body.
5. Turn out four screws of fastening of a bumper to the back panel …
6. … also remove a back bumper.
7. If necessary turn on from within a luggage carrier two nuts of fastening of a lateral power absorbing element …
8. … also remove power absorbing element. Similarly remove the second lateral power absorbing element.
9. If necessary turn out four screws of fastening of the central power absorbing element to a back bumper …

THE NOTE
So screws of fastening of the central power absorbing element to a bumper are located.

10. … also remove the central power absorbing element.
11. Collect and establish a back bumper, and also all removed details in an order, the return to removal.

The previous page
11.3.1. Removal, dismantling and installation of a forward bumper
The following page
11.4. Removal and installation of facing of a radiator