Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal, dismantling and installation of bumpers
11.3.1. Removal, dismantling and installation of a forward bumper
11.3.2. Removal, dismantling and installation of a back bumper
11.4. Removal and installation of facing of a radiator
11.5. Removal and installation of mudguards of wheels and Lockers
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice of a box air flow
11.8. A cowl
11.9. Doors
11.10. A luggage carrier cover
11.11. A cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Rear-view mirrors
11.16. The panel of devices
11.17. A heater and the conditioner
11.18. Salon armature
11.19. Removal and installation of facings of salon
11.20. Removal and installation of facings of a luggage carrier
11.21. A screen wiper of a wind window
11.22. Replacement motionless glazing bodies
11.23. Removal and installation of a shelf of fastening of the storage battery
11.24. Care of a body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








11-3-1-snyatie-razborka-i-ustanovka-perednego-bampera.html

11.3.1. Removal, dismantling and installation of a forward bumper

It be required to you: all tools necessary for removal of mudguards and Lockers of forward wheels (Removal and installation of mudguards of wheels and Lockers »see«), and also a key «on 10», a face head «on 12», a screw-driver with a crosswise edge.
1. From both parties of the car remove mudguards and подкрылки forward wheels (Removal and installation of mudguards of wheels and Lockers »see«).
2. Open a cowl, establish it on an emphasis and turn on on one nut of the top fastening of a forward bumper to a body at the left …
3. … and on the right.
4. In arches of forward wheels turn on on two nuts of forward fastening of a bumper to a body …
5. … turn out on one bolt of the bottom fastening …
6. … on one screw of lateral fastening …
7. … also remove a forward bumper.
8. If necessary turn out five screws of fastening of a skeleton of a power absorbing element to the top edge of the bumper, four screws — to the bottom edge of a bumper …
9. … remove a skeleton …
10. … and a power absorbing element.
11. Collect and establish a forward bumper, and also all removed details in an order, the return to removal.

«The previous page
11.3. Removal, dismantling and installation of bumpers
The following page»
11.3.2. Removal, dismantling and installation of a back bumper











cf8e4909