8.2.1. Removal and steering wheel installation

The face head on 22 is required to you.

1. Disconnect a wire from the plug "minus" of the storage battery.

2. Establish a steering wheel in the position corresponding to rectilinear movement of the car.

3. Remove the module of a pillow of safety of the driver (Removal and installation of a pillow of safety of the driver see).	4. Loosen the an inhaling of a nut of fastening of a steering wheel to a steering shaft, keeping a steering wheel from проворачивания.

THE PREVENTION Nut of fastening of a wheel completely do not turn on, differently at removal by steering wheel hands it is possible to put itself a trauma in case of its sharp detachment from a steering shaft, as a steering wheel подпружинено.

    

GOOD ADVICE To fix a steering wheel from проворачивания it is possible with the help запорного the mechanism of the antijoy ride device of the lock of ignition. For this purpose take out a key from the lock of ignition and turn a steering wheel till the moment of fixing of a shaft the antijoy ride device. After easing of an inhaling of a nut of fastening of a steering wheel disconnect the antijoy ride device, having inserted a key into the ignition lock, and again establish a steering wheel in position of rectilinear movement.

5. Sharp blows of hands bring down a steering wheel with шлицев a steering shaft …	6. … definitively turn away a fastening nut …

7. … also remove a steering wheel.	8. Fix a contact ring of a pillow of safety from проворачивания a pin of suitable diameter.

9. Remove a spring established under a steering wheel.

10. Establish a steering wheel in an order, the return to removal.