4-2-3-proverka-urovnya-i-dolivka-okhlazhdayushhejj-zhidkosti.html
4.2.3. Check of level and доливка a cooling liquidIt be required to you: a cooling liquid, a funnel, a pure rag.
RECOMMENDATIONS
The Manufacturer recommends to apply cooling liquid (antifreeze) on a basis этиленгликоля. Specify at the dealer — the seller of the car mark of the liquid filled in in your car.
Do not mix a liquid of different colour and different manufacturers. If it is necessary for you to add cooling liquid, but you do not know mark of the liquid filled in in system, replace all liquid in cooling system.
Apply production only the checked up manufacturers. Remember that application of a bad quality cooling liquid leads to expensive repair of the engine!
Before the work beginning establish the car on an equal surface.
|
PREVENTIONS
Check level of a cooling liquid only on the cold engine.
The cooling liquid is toxic, therefore at work with it observe safety measures.
Do not pour a liquid in a tank above a label MAX as at engine work its volume will increase.
At start-up of the engine the stopper of a broad tank should be densely closed.
|
|
GOOD ADVICE
Constantly watch level of a cooling liquid. Its sharp decrease or increase should become a signal for immediate check of system of cooling of the engine.
If свежезалитый antifreeze suddenly has unexpectedly quickly changed colour with blue on brown, means, to you have sold a fake in which "have forgotten" to add ингибиторы corrosion. As soon as possible replace a liquid while she has not had time to corrode cooling system.
|
The broad tank is established in подкапотном space on the left side.
|
|
|
|
1. Level of a cooling liquid should be between labels MAX and MIN, put on a wall of a broad tank.
|
2. For доливки liquids turn away a stopper of a broad tank …
|
|
|
|
|
3. … also add cooling liquid to demanded level.
|
4. Wrap a stopper of a broad tank.
|
|
THE PREVENTION
Wrap densely a stopper of a broad tank. At the working engine the broad tank is under pressure, therefore from under poorly wrapped up stopper the cooling liquid can begin to flow or a stopper can break.
|
| 