4-2-2-proverka-urovnya-i-dolivka-masla-v-sistemu-smazki.html
4.2.2. Check of level and доливка oils in greasing systemIt be required to you: engine oil, a funnel, a pure rag.
THE RECOMMENDATION
Engine oil type: degree of quality API SJ or ACEA A1/A2/A3, viscosity 5W-40, 10W-40 or 15W-40 (depending on environmental conditions).
|
PREVENTIONS
Before check of level of oil after a trip muffle the engine and wait for 5-10 mines while oil will not merge in the pallet.
Add oil of the same mark, viscosity and a quality class, as well as at used earlier.
Oil level in картере the engine should not exceed a label MAX, leaks through linings and the epiploons, the raised expense of oil differently are possible.
Check level, having established the car on an equal horizontal platform.
|
The stopper маслоналивной mouths is located on a cover of a head of the block of cylinders. The index (щуп) oil level is located in the left part of the block of cylinders near to маслоналивной a mouth.
|
|
|
|
1. Take out the index (щуп), wipe a pure rag and again insert it into place.
|
2. Repeatedly take out the index (щуп). Level of an oil film should be between labels MIN and MAX. If oil level comes nearer to a label MIN or below it, add oil.
|
|
|
|
|
3. For доливки oils turn a stopper маслоналивной mouths counter-clockwise …
|
4. … also remove it.
|
5. Fill in oil in the engine, supervising by means of the index its level. Before taking out the index, wait for 2-3 mines to allow to oil to flow down in картер.
6. After oil level will reach demanded, wrap a mouth stopper.
|
|
