Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal, dismantling and installation of bumpers
11.4. Removal and installation of facing of a radiator
11.5. Removal and installation of mudguards of wheels and Lockers
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice of a box air flow
11.8. A cowl
11.9. Doors
11.10. A luggage carrier cover
11.11. A cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.12.1. Removal and installation of a forward seat
11.12.2. Removal and installation of a headrest of a forward seat
11.12.3. Removal and installation of a back seat
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Rear-view mirrors
11.16. The panel of devices
11.17. A heater and the conditioner
11.18. Salon armature
11.19. Removal and installation of facings of salon
11.20. Removal and installation of facings of a luggage carrier
11.21. A screen wiper of a wind window
11.22. Replacement motionless glazing bodies
11.23. Removal and installation of a shelf of fastening of the storage battery
11.24. Care of a body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 








11-12-3-snyatie-i-ustanovka-zadnego-sidenya.html

11.12.3. Removal and installation of a back seat

The pillow of a back seat integral also can be removed entirely. The back of a back seat consists of two parts, each of which can be removed separately. Removal of the right part of a back is more low shown, the left part remove similarly.
It be required to you: a key «on 12» (it is more convenient to use a face head), a stripper for removal of percussion caps or a screw-driver with a flat edge.
1. Having raised a forward part of a pillow of a back seat, deduce two скобы its fastenings on the right and at the left from apertures on a body.

THE NOTE
So look скобы pillow fastenings …
… and so — apertures in a body.


2. Wring out an upholstery in a back part of a pillow on the right and at the left to get access to two bolts of its fastening to a body...
3. … turn out bolts …
4. … also take a pillow of a back seat from car salon.
5. Access to bolts of fastening of the right part of a back of a back seat is closed by edge of an upholstery of the luggage carrier attached to a body by three percussion caps. Disconnect edge of an upholstery from a body …
6. … having removed percussion caps a special stripper or having hooked a screw-driver …
7. … turn out two bolts of fastening of the right part of a back to an arm …
8. … shift the right part of a back downwards and to the left …
9. … to take a clamp of a back from an aperture in a body, and remove the right part of a back of a back seat from the car.
10. In need of replacement of the lock of a back of a back seat screw together the button from draught of a drive of the lock …
11. … turn on two nuts of fastening of the lock to a seat skeleton …
12. … also remove the lock.
13. For removal of a latch of the lock of a back of a back seat remove back facing боковины (Removal and installation of facings of salon »see«) and turn out two bolts of fastening of a latch to a body.
14. Establish a back seat and all removed details in an order, the return to removal.

«The previous page
11.12.2. Removal and installation of a headrest of a forward seat
The following page»
11.13. Removal and installation of facing of a tunnel of a floor











cf8e4909