Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. The storage battery
10.4. The generator
10.4.1. Features of a design
10.4.2. Possible malfunctions of the generator, their reason and ways of elimination
10.4.3. Removal and generator installation
10.4.4. Replacement of a pulley of the generator
10.4.5. Generator repair
10.5. A starter
10.6. The switch (lock) of ignition
10.7. A control system of the engine
10.8. Illumination, the light and sound alarm system
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10.10. Removal and installation of a washer of glass of a wind window
10.11. Removal and installation of the electric motor of the basic fan of a radiator of system of cooling of the engine
10.12. Removal and installation of the electric motor of the additional fan of a radiator of system of cooling of the engine
10.13. Electroheating of glass of a window of a back
10.14. Removal and cartridge installation cigarette Lighter
10.15. A combination of devices
10.16. Switches of the panel of devices
10.17. Replacement of blocks of management эpower windows
10.18. An automobile audiosystem
10.19. Replacement of gauges and switches
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





10-4-3-snyatie-i-ustanovka-generatora.html

10.4.3. Removal and generator installation

Two keys on 12 be required to you.
1. Disconnect a wire from the plug "minus" of the storage battery.

THE NOTE
The belt of a drive of the generator and the pump of the hydraulic booster of a steering does not need to be removed from the car, it is enough to remove of it from a generator pulley. Thus it is not necessary to remove a belt of a drive of the compressor of the conditioner.

3. Definitively turn out a bolt of fastening of the generator to a tension lath.
4. Wring out a clamp and disconnect pad a plait of wires from the generator.
5. Turn away a nut of fastening of a tip of a wire …
6. … also disconnect a wire from a generator conclusion.
7. Turn away a nut 2, keeping bolts 1 from проворачивания, and take bolts.
    
THE NOTE
The photo of fastening of the generator is made from below the car for descriptive reasons. Turn on nuts and take bolts from above from подкапотного spaces.

8. Take the generator from подкапотного spaces.
9. Establish the generator in an order, the return to removal.
10. Establish into place a belt of a drive of the generator and adjust its tension (Check and adjustment of a tension of a belt of a drive of the generator and the pump of the hydraulic booster of a steering see).

The previous page
10.4.2. Possible malfunctions of the generator, their reason and ways of elimination
The following page
10.4.4. Replacement of a pulley of the generator