10-3-3-snyatie-i-ustanovka-akkumulyatornojj-batarei.html
10.3.3. Removal and installation of the storage batteryThe key on 10 is required to you.
|
|
|
|
1. Loosen the an inhaling of a nut of a coupling bolt of a tip of a wire …
|
2. … also disconnect a wire from the plug "minus" of the storage battery.
|
|
|
|
|
3. Cast away a protective cap …
|
4. … ослабьте an inhaling of a nut of a coupling bolt of a tip of a wire …
|
|
|
|
|
5. … also disconnect a wire from the plug "plus" of the storage battery.
|
6. Loosen the an inhaling of nuts of fastening of a clamping lath.
|
|
|
|
|
7. Deduce couplers from apertures of a shelf of the storage battery …
|
8. … also remove a clamping lath in gathering with couplers.
|
9. Remove the storage battery from the car.
10. Establish the storage battery in an order, the return to removal. Before connection of wires smooth out plugs of the battery and internal surfaces of tips of wires a fine-grained emery paper. Wires connect in an order, the return to removal, observing polarity. After connection of wires to battery plugs put on metal tips of wires and open surfaces of plugs a thin layer of greasing Litol-24 or similar (are most preferable медесодержащие current-carrying greasings).
| 