Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. The storage battery
10.4. The generator
10.5. A starter
10.6. The switch (lock) of ignition
10.7. A control system of the engine
10.8. Illumination, the light and sound alarm system
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10.10. Removal and installation of a washer of glass of a wind window
10.11. Removal and installation of the electric motor of the basic fan of a radiator of system of cooling of the engine
10.12. Removal and installation of the electric motor of the additional fan of a radiator of system of cooling of the engine
10.13. Electroheating of glass of a window of a back
10.14. Removal and cartridge installation cigarette Lighter
10.15. A combination of devices
10.16. Switches of the panel of devices
10.17. Replacement of blocks of management эpower windows
10.18. An automobile audiosystem
10.19. Replacement of gauges and switches
10.19.1. Replacement of the gauge of an alarm lamp of emergency pressure drop of oil
10.19.2. Check and replacement of the gauge of the index of temperature of a cooling liquid
10.19.3. Check and replacement of the gauge of the index of level of fuel
10.19.4. Check and replacement of the switch of light of a backing
10.19.5. Replacement of the switch of a stoplight
10.19.6. Replacement of the switch of an alarm lamp of inclusion of a lay brake
10.19.7. Replacement of switches of a plafond of illumination of salon
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





10-19-1-zamena-datchika-signalnojj-lampy-avarijjnogo-padeniya-davleniya-masla.html

10.19.1. Replacement of the gauge of an alarm lamp of emergency pressure drop of oil

The gauge of an alarm lamp of emergency pressure drop of oil will screw in the case of the oil pump.
The high face head on 24 is required to you.
1. Establish the car on the lift or a viewing ditch and disconnect a wire from the plug "minus" of the storage battery.
2. Wring out a clamp and disconnect from the gauge pad a plait of wires.
3. Turn out the gauge from the case of the oil pump …
4. … also remove it.

    
THE NOTE
Replace a copper sealing washer new at each removal of the gauge of an alarm lamp of emergency pressure drop of oil.

5. Establish the gauge of an alarm lamp of emergency pressure drop of oil in an order, the return to removal.

The previous page
10.19. Replacement of gauges and switches
The following page
10.19.2. Check and replacement of the gauge of the index of temperature of a cooling liquid