Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
17.1. Safety precautions at carrying out of repair work
17.1.1. The general requirements
17.1.2. Safe lifting of the car
17.2. Tools
17.3. Before the work beginning
17.4. Restoration of carving connections
18. Appendices
19. Electric equipment schemes
 








17-1-1-obshhie-trebovaniya.html

17.1.1. The general requirements

1. Any works on repair and car maintenance service are necessary for spending in the spacious, well ventilated and shined premise.
2. The workshop equipment (load-lifting mechanisms, machine tools, electrotools) should be specially adapted for performance of repair operations (for example, for a food of portable lighting devices it is desirable to use low voltage sources – 36 or 12 In, instead of 220).
3. Do not smoke and do not use open fire indoors where there is a car, there are combustive-lubricating materials and so forth
4. At work with the metalwork tool use gloves – they will protect hands not only from a dirt, but also from scratches and cuts.
5. Any works from below the car carry out in goggles.
6. At carrying out кузовного repair (шпатлевка, painting, polishing) put on a respirator and provide additional ventilation of a premise.
7. The works connected with removal and installation of heavy knots and units of the car, carry out with the assistant.
8. Capacities with the combustive-lubricating and paint and varnish materials stored in a workshop, should be always densely closed. Do not suppose a finding of such materials in a zone of falling of sparks at use of the metal-cutting tool.
9. Do not suppose hit of oils (especially fulfilled), antifreeze and electrolit on open sites of a skin. In case of hit смойте as soon as possible a soap solution.
10. Do not use for clearing of a skin of hands gasoline, diesel fuel, solvents, etc.
11. Remember that improper maintenance of an electric equipment and fuel equipment can lead to a fire. If you are not assured of the knowledge on service of the specified systems, address to experts is better. If all of you have decided to perform work independently, strictly follow all recommendations and preventions.
12. Observe extra care at the car repairs, equipped with pillows of safety or tensionми belts. Do not try to repair independently knots of these systems (the electronic block of management of safety pillows, modules of pillows of safety, a steering wheel, blow gauges, преднатяжители belts and so forth) as wrong performance of works can lead to operation of these devices and, as consequence, to serious traumas. At performance of any works in a zone of an arrangement of these devices attentively study all recommendations and preventions.
13. Tools and the equipment, applied at car repairs, should be serviceable. It is necessary to give special attention to a condition of isolation of electric wires.
14. At service of the cars equipped with a central air of air, do not suppose system depressurization as the coolant containing in it is poisonous.

«The previous page
17.1. Safety precautions at carrying out of repair work
The following page»
17.1.2. Safe lifting of the car











cf8e4909