Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
17.1. Safety precautions at carrying out of repair work
17.2. Tools
17.2.1. The basic complete set of tools
17.2.2. Special tools and adaptations
17.3. Before the work beginning
17.4. Restoration of carving connections
18. Appendices
19. Electric equipment schemes
 



cf8e4909





17-2-1-osnovnojj-komplekt-instrumentov.html

17.2.1. The basic complete set of tools

Even if you will spend simple repair work, the set of a minimum quantity of tools is required to you. This complete set includes following keys and adaptations:
– A set of keys TORX of types T and E. On car Chevrolet Lanos the part of fixing details is executed under tool TORX;
– A set of screw-drivers with flat and crosswise edges of the different sizes, with convenient handles. At a choice of screw-drivers (especially with a crosswise edge) be accurate, as the improper size of an edge can break шлицы in a screw head;
– A set рожковых and накидных keys. It is desirable to have keys in the size from 5 to 27 mm, and at car repairs of import manufacture keys of any size from the specified range, for example on 15 or on 18 can be necessary;
– Candle keys on 16 or on 21 (depending on a standard size of spark plugs applied on your car);
– A set of keys-shestigrannikov of the different sizes (the sizes from 2 to 10 mm with step of 1 mm more often are necessary);
пассатижи, бокорезы and пассатижи with changeable capture;
– Hammers of the different sizes with metal and rubber бойками (the last are necessary at carrying out рихтовочных works);
кернеры the different sizes (are necessary at carrying out of drilling works), a set of chisels (it is possible to use that законтрить a nut or to cut down such which it is impossible to turn on);
– At work with electric equipment system the display screw-driver and a set of plugs of various standard sizes are necessary special пассатижи for обжимания plugs and tips, the adaptation for зачистки wires;
– At works with remote knots and units the set of face keys with a vorotkom-rattle and карданным the hinge is necessary;
– A set of universal strippers of the different sizes for выпрессовки bearings and other details.

The previous page
17.2. Tools
The following page
17.2.2. Special tools and adaptations