Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
9.1. Features of a design
9.2. Possible malfunctions of brake system, their reason and ways of elimination
9.3. Prorolling of a hydrodrive of brake system
9.4. Check and adjustment of position of a pedal of a brake
9.5. The main brake cylinder
9.6. The vacuum amplifier of brakes
9.7. Replacement of hoses and tubes of a hydrodrive of brakes
9.7.1. Replacement of brake hoses
9.7.2. Replacement of brake tubes
9.8. Removal and installation of a pedal of a brake
9.9. Brake mechanisms of forward wheels
9.10. Brake mechanisms of back wheels
9.11. A lay brake
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





9-7-2-zamena-tormoznykh-trubok.html

9.7.2. Replacement of brake tubes

Connections of tubes with all knots of brake system and hoses, and also a principle of their replacement are identical. All nuts of tubes are executed on a turn-key basis on 10.
Works are shown on an example of the tube connecting a back brake hose with the working cylinder of the back brake mechanism.

GOOD ADVICE
For отворачивания nuts of tubes apply special keys as nuts are strongly tightened and usually корродированы owing to what at using usual keys of a side of nuts are rumpled.

1. Turn away a nut of fastening of a tube to the working cylinder. It is more convenient to make it, preliminary having turned out the valve for air removal (Replacement of the working cylinder of the brake mechanism of a back wheel see).
2. Turn away a nut of fastening of a tube to a back brake hose …
3. … unbend the metal holder on a beam of a back suspension bracket …
4. … deduce a tube from the holder and lift the receiver.

THE NOTE
The holder of a tube to the working cylinder of the brake mechanism of the right back wheel is made of plastic.

5. Establish a new tube in an order, the return to removal.
6. After tube replacement remove air from brake system (Prorolling of a hydrodrive of brake system see).

The previous page
9.7.1. Replacement of brake hoses
The following page
9.8. Removal and installation of a pedal of a brake