6-1-5-zamena-rabochego-cilindra-privoda-vyklyucheniya-scepleniya.html
6.1.5. Replacement of the working cylinder of a drive of deenergizing of couplingIt be required to you: a key on 12, a key-shestigrannik on 6.
1. Turn out a bolt-union and disconnect from the working cylinder a hose. Muffle a hose that the brake liquid did not follow.
THE NOTE
Pay attention to presence and a relative positioning of two copper sealing washers. The pressed out washers at assemblage replace new.
|
|
|
2. Turn out two screws of fastening of the working cylinder to an arm on картере couplings...
|
3. … also remove the working cylinder.
|
4. Establish details in an order, the return to removal, preliminary having greased консистентной with greasing interfaced surfaces of a rod of the working cylinder and the lever of a shaft of deenergizing of coupling.
|