Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
5.1. Features of a design
5.2. Compression check in cylinders
5.3. Removal and installation of mudguards of the engine
5.4. Replacement of support of a suspension bracket of the power unit
5.5. Installation of the piston of the first cylinder in position
ВМТ
of a step of compression
5.6. Removal, installation and
дефектовка a
flywheel
5.7. Replacement of details of consolidation of the engine
5.8. A head of the block of cylinders
5.9. Removal and engine installation
5.10. Engine repair
5.11. Greasing system
5.12. Cooling system
5.13. System of release of the fulfilled gases
5.14. The engine power supply system
5.14.1. Features of a design
5.14.2. Pressure check in the engine power supply system
5.14.3. Pressure decrease in the power supply system
5.14.4. Removal and installation of the air filter, the muffler of noise of an admission and an air line
5.14.5. Replacement of the fuel pump
5.14.6. Replacement of a fuel tank and its bulk pipe
5.14.7. Check and replacement of a regulator of pressure of fuel
5.14.8. Removal and installation of a fuel stage
5.14.9. Removal, installation and check of atomizers
5.14.10. Removal and installation of throttle knot
5.14.11. Check and replacement of a regulator of idling
5.14.12. Adjustment and replacement of a cable of a drive throttle
заслонки
5.14.13. Removal and installation of a pedal of an accelerator
5.15. System of catching of steams of fuel
5.16. System
рециркуляции the
fulfilled gases
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
5-14-sistema-pitaniya-dvigatelya.html
5.14. The engine power supply system
Features of a design
Pressure check in the engine power supply system
Pressure decrease in the power supply system
Removal and installation of the air filter, the muffler of noise of an admission and air line
Replacement of the fuel pump
Replacement of a fuel tank and its bulk pipe
Check and replacement of a regulator of pressure of fuel
Removal and installation of a fuel stage
Removal, installation and check of atomizers
Removal and installation of throttle knot
Check and replacement of a regulator of idling
Adjustment and replacement of a cable of a drive throttle
заслонки
Removal and installation of a pedal of an accelerator
The
previous page
5.13.7. Removal and installation of thermoscreens
The following page
5.14.1. Features of a design
