4.3.5. Clearing of system of ventilation картера

In due course in ventilation system картера the engine resinous adjournment from картерных the gases, complicating tap of these gases in cylinders of the engine for burning collect. Because of it pressure of gases in the engine there are oil leaks through consolidations. That it was not, periodically clear and wash out system.

The screw-driver with a flat edge is required to you.

GOOD ADVICE Clear ventilation system картера before each replacement of oil.

1. Loosen the a collar inhaling …	2. … also disconnect bringing hose of system of ventilation картера from a branch pipe of the case of a camshaft. Similarly disconnect a hose from a branch pipe of the block of cylinders and remove it.

3. Compress the unbent short moustaches of a collar of fastening of a taking away hose of system to a branch pipe of a cover of the case of a camshaft, shift a collar on a hose …	4. … also remove a hose from a branch pipe.

5. Disconnect a hose of a small branch of system from the union of an inlet pipe located behind a pipe.	6. Compress the unbent short moustaches of a collar of fastening of a taking away hose of system to the union воздухоподводящего sleeves, shift a collar on a hose …

7. … disconnect a hose from a sleeve …	8. … also remove taking away hose of system of ventilation картера the engine in gathering.

9. Wash out hoses gasoline or kerosene, blow compressed air and dry. Clean apertures of unions and branch pipes for connection of hoses.

10. Uncover heads of the block of cylinders (Replacement of a lining of a cover of a head of the block of cylinders of the engine see).

    

GOOD ADVICE At each removal of a cover of a head of the block of cylinders replace its lining new.

11. Wash out gasoline or kerosene маслоотражатели, an internal surface of a cover of a head of the block of cylinders and its branch pipe.

12. Establish a cover of a head of the block of cylinders and hoses of system of ventilation картера in an order, the return to removal.