Chevrolet Lanos (since 2004 of release)
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance service
5. The engine
6. Transmission
7. A running gear
8. A steering
9. Brake system
10. An electric equipment
11. A body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal, dismantling and installation of bumpers
11.4. Removal and installation of facing of a radiator
11.5. Removal and installation of mudguards of wheels and Lockers
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice of a box air flow
11.8. A cowl
11.9. Doors
11.9.1. Removal and installation of an upholstery of a forward door
11.9.2. Replacement of glass of a forward door
11.9.3. Replacement стеклоподъемника a forward door
11.9.4. Replacement of the external handle of a forward door
11.9.5. Replacement of the internal handle of a drive of the lock of a forward door
11.9.6. Replacement of the switch of the lock of a forward door
11.9.7. Replacement of the lock of a forward door
11.9.8. Replacement of the terminator of opening of a forward door
11.9.9. Removal and installation of a forward door
11.9.10. Removal and installation of an upholstery of a back door
11.9.11. Replacement of glass of a back door
11.9.12. Replacement стеклоподъемника a back door
11.9.13. Replacement of the external handle of a back door
11.9.14. Replacement of the internal handle of a drive of the lock of a back door
11.9.15. Replacement of the lock of a back door
11.9.16. Replacement of the terminator of opening of a back door
11.9.17. Removal and installation of a back door
11.10. A luggage carrier cover
11.11. A cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Rear-view mirrors
11.16. The panel of devices
11.17. A heater and the conditioner
11.18. Salon armature
11.19. Removal and installation of facings of salon
11.20. Removal and installation of facings of a luggage carrier
11.21. A screen wiper of a wind window
11.22. Replacement motionless glazing bodies
11.23. Removal and installation of a shelf of fastening of the storage battery
11.24. Care of a body
12. Wheels and tyres
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Councils to the beginning mechanic
18. Appendices
19. Electric equipment schemes
 



cf8e4909





11-9-17-snyatie-i-ustanovka-zadnejj-dveri.html

11.9.17. Removal and installation of a back door

The face head on 10 is required to you.
1. Remove an upholstery of a back door and влагозащитную a film (Removal and installation of an upholstery of a back door see).
2. Disconnect from an average rack the terminator of opening of a door (Replacement of the terminator of opening of a back door see).
3. If remove a door not for replacement, mark position of its loops on a door (for example, lead round loops on a contour a felt-tip pen).
4. Holding a door (is better if it will be done by the assistant), turn out on two bolts of fastening top …
5. … and the bottom loops to a door also remove a door.

    
THE NOTE
Unlike a forward door bolts of fastening of loops of a back door to a body rack are readily available.
Therefore at desire it is possible to remove a back door, turning out bolts of fastening of its loops to a rack.

6. Establish a back door in an order, the return to removal.
The previous page
11.9.16. Replacement of the terminator of opening of a back door		 The following page
11.10. A luggage carrier cover