11-9-10-snyatie-i-ustanovka-obivki-zadnejj-dveri.html
11.9.10. Removal and installation of an upholstery of a back doorIt be required to you: screw-drivers with crosswise and flat edges.
1. Having hooked a screw-driver, remove facing of the internal handle of the lock.
|
GOOD ADVICE
Not to scratch a detail, wrap up a screw-driver sting изоляционной a tape.
|
|
|
|
|
2. Turn out the screw of fastening of facing of a nest in a door armrest …
|
3. … also remove facing.
|
|
|
|
|
4. Wring out to an upholstery of a door the handle socket стеклоподъемника …
|
5. … through the formed backlash take a spring clamp of the handle, having hooked its screw-driver …
|
|
|
|
|
6. … also remove the handle стеклоподъемника and its socket.
|
7. Remove facing of a corner of a back door, overcoming effort of its two spring holders.
|
|
|
|
|
8. Turn out two screws of fastening of an upholstery to the bottom edge of a door.
|
9. Having hooked a screw-driver an upholstery in the locations of its plastic percussion caps …
|
|
THE NOTE
The upholstery (a kind from an underside) is attached to the panel of a door by five plastic percussion caps. The damaged percussion caps replace new, having taken out them from upholstery arms.
If necessary remove from an upholstery поролоновое a sealing ring and the platen стеклоподъемника.
|
|
|
|
|
10. … disconnect an upholstery from the door panel, overcoming effort of percussion caps.
|
11. Turn out two screws of fastening of an arm of an armrest to the panel of a door and remove an arm.
|
12. Unstick from the door panel влагозащитную a film.
13. Establish an upholstery of a back door and all removed details in an order, the return to removal.
|
THE NOTE
At installation of an arm of an armrest of the marksman, выштампованная on it, should be directed forward in a direction of movement of the car.
|
|
|
