11-9-1-snyatie-i-ustanovka-obivki-perednejj-dveri.html
11.9.1. Removal and installation of an upholstery of a forward doorIt be required to you: screw-drivers with crosswise and flat edges.
1. Disconnect a wire from the plug "minus" of the storage battery.
|
|
|
|
2. Turn out the screw of fastening of facing of an armrest …
|
3. … shift facing back to deduce its clamp from gearing with an armrest...
|
|
|
|
|
4. … also take facing from an armrest nest.
|
5. Disconnect pad a plait of wires from the management block эpower windows, established in facing, and remove facing.
|
|
|
|
|
6. Remove a decorative overlay of a support of an external rear-view mirror, overcoming resistance of its clamps.
|
7. Having hooked a screw-driver …
|
|
GOOD ADVICE
Not to scratch a detail, wrap up a screw-driver sting изоляционной a tape.
|
|
|
|
|
8. … remove facing of the internal handle of the lock.
|
9. Turn out three screws of fastening of an upholstery to the bottom edge of a door.
|
10. Disconnect an upholstery from the door panel, overcoming effort of percussion caps.
|
THE NOTE
The door upholstery (a kind from an underside) is attached to the panel of a door by five plastic percussion caps. The damaged percussion caps replace new, having taken out them from upholstery arms.
If necessary remove from an upholstery a pocket, having turned out seven screws of its fastening.
|
|
|
|
|
11. Turn out two screws of fastening of an arm of an armrest to the panel of a door and remove an arm.
|
12. Unstick from the door panel влагозащитную a film.
|
13. Establish an upholstery of a back door and all removed details in an order, the return to removal.
|
THE NOTE
At installation of an arm of an armrest of the marksman, выштампованная on it, should be directed forward in a direction of movement of the car.
|
|
|
