1-2-pasportnye-dannye.html
1.2. Nameplate data
|
Fig. 1.8. The identification tablet: 1 – manufacturer; 2 – identification number of the car; 3 – volume and engine type; 4 – a national sign on conformity ДСТУ 2296; 5 – number of approval of type of a vehicle of Russia; 6 – a sign on conformity of certification; 7 – a safe load on a back axis of the car; 8 – a safe load on a forward axis of the car; 9 – full admissible weight of the car with the trailer; 10 – admissible full weight of the car
|
Identification number (VIN) the car, the engine model, the manufacturer name, year of release and the information on certification are specified in the identification tablet ( fig. 1.8) …
… attached отрывными rivets in подкапотном space on a board partition передка over the vacuum amplifier.
Besides, identification number of the car is put by a marking-off on a board of a motor compartment.
THE NOTE
On car Daewoo Lanos identification number of a body which contains the additional information on a body, is put on the tablet which is attached to the top part of the forward panel of a motor compartment.
|
Decoding of identification number, for example Y6DTF69Y070000000:
Y6D — The international code of manufacturer;
TF69Y0 – A code of model of the car;
7 – a code of year of release of the car;
0 – a manufacturer code;
000000 – serial number of a body.
The model and engine number are beaten out on inflow of the block of cylinders over the oil filter near the index of level of oil (for descriptive reasons the index of level of oil is removed).
Decoding of number of the engine, for example A15SMS 000000B:
A — рядное an arrangement of cylinders of the engine (V — V-shaped);
15 – working volume of the engine of 1,5 l;
S — a code газораспределительного the mechanism (S — SOHC, 2 valves on the cylinder; M — SOHC, 3 valves on the cylinder/SOHC, 4 valves on the cylinder; D — DOHC, 4 valves on the cylinder; H — CIH);
M — a power supply system code (M — MPI; T — TPI; L — LPG; C — CNG; A — spirit; I — the distributed injection; D — direct injection; In — the carburettor);
S — a code of degree of compression (GЈ8,5; 8,5ЈL <9,0; 9,0ЈN <9,5; 9,5ЈS <10,0; 10,0ЈX <11,5; 11,5ЈY);
00000 – engine number;
In — a site of assembly factory.
|